| |
|
|
|
|
 
| |
Patterned after the Malcolm mount, but with a few
variations. Windage adjustable to .001''; elevation
adjustable to .002''. Front mount adjustable for mechanical
zero and when used together, rear mount can adjust for wind
changes quickly and accurately. Mounts will fit all 3/4"
tube scopes with Pope-style rib. Comes with set of your
choice of dovetail mounts.
Price $450
Complete Set with screws and blocks: 7.1 oz.
CALL FOR CURRENT AVAILABILITY & DELIVERY
  |
|
|
 |
| |
|
| |
Our mounts are patterned after the Malcolm C mount, but
incorporate a few refinements. Each mount is windage and
elevation adjustable in .001" increments. This allows the
shooter to adjust the mount a specific value, which is
calculated based upon the mount spacing, to move one minute
of angle. We recommend a 10.34" enter-to-center spacing on
the 23" scope, and 17" for the 3000, 4000, 5000, and 6000
series scopes. This spacing will allow for a .003" per MOA
adjustment on the 23" scope, for a total of 208 MOA, and
.005" per MOA adjustment on the 3, 4, 5, and 6000 series
scopes, for a total of 125 MOA. Rear scope mount staff to
base dovetail mating surfaces are EDM cut for a precise fit.
Due to increased customer feedback, MVA has evolved their
rear scope mount into three styles. Styles are of the same
high quality and aesthetic appeal, but are configured to
increase the ease with which the adjustments are made.
The Schuetzen Mount is similar to the
original. The only change is the threads on the elevation
screw being made left handed. This makes the adjustments
consistent with Lyman and Unertl turret mounts. Turning the
elevation knob clockwise now moves the point of bullet
impact down and turning the windage knob clockwise moves the
point of impact to the left.
The Silhouette Mount has the elevation knob
and engraving moved to the left side of the staff. This
makes it easier for a right handed shooter in the prone
position to see the elevation adjustments. Both elevation
and windage adjustments are consistent with our Soule tang
sights. Turning the elevation knob clockwise moves the point
of impact to the right. With all rear mounts, the MOA
adjustment must be calculated based upon the mount spacing.
The New Creedmoor Mount is similar to the
regular Silhouette mount except that it has an additional
125 Minutes of Angle adjustment in elevation. This is useful
for the series 3000 through 6000 scopes when shooting farther
than 800 yards. The advantage of this mount is the ability
to shoot from 25 yards to approximately 1250 yards,
depending upon caliber. This mount is not recommended for
this 23" scope on a 30" or longer barrel. At the top of
travel the scope will be pointed at the barrel, thus
obstructing the view. |
|
| |
|
|
| |
   |
| |
|
|
| |
-
Includes a set of Screw-on or Dovetail
blocks.
-
Front & Rear Mount sold as a set.
-
Additional sets of blocks sold
separately. Mounts will fit all 3/4" tube scopes with
the Pope-style rib.
-
RISER BLOCKS: These blocks come in 30,
40, or 50 Minute heights. They are used with the rear
mount to increase range for shooting. A drawback is the
loss of short range shots.
-
Mounts will fit all tube scopes with a
Pope-style rib.
|
|
| |
|
|
|
| 61
Andrea Drive Belgrade, Montana 59714-8918
406-388-4027 |
|
s |
|
|
|
|
